You have no items in your shopping cart.
The 2019 Fox36 Ebike version features the Fox36 chassis but with thicker stanchions so it uses the Fox 34 sized internals with firming damping. It is mostly found on E-bikes but also on pedal bikes from Scott.
Brand |
Fox |
Stanchions |
36 mm Black anodised or Kashima 7000 series alloy with thicker walls |
Model |
Fox 36 E-bike 2019 |
Crown & Lowers |
Black crown, Black lowers. |
Release Year/s |
2019+ |
Decals |
Various |
Damper Options |
FIT4 PS - LSR and 3 modes FIT4 FS - LSR and LSC with 3 modes FIT4- LSR & Remote lockout Grip - LSC adjust Grip - Remote lockout |
Wheel Size |
27" 15x110 Boost (not plus) 27+/29" 15x110 Boost fits 29x2.5" or 27x3.0" |
Spring |
Fox34 sized NA2 EVOL air spring with self balancing positive and negative via stanchion notch. Individual volume spacers clip under top-cap |
Configurations & Maximum Travel |
27" 180 mm Max 29" 160 mm Max Travel change by air shaft length change |
Updates from 2018 |
New configuration |
Upgrade Compatibility |
Damper upgrades Vorsprung Luftkappe air spring upgrades Vorsprung Fractive tuning for FIT4 forks. Shockcraft tuning for Grip dampers |
Make your Fox even better with these upgrades. Purchase either with a Shockcraft service or for DIY installation. Pricing is provided at links below.
Vorsprung Luftkappe |
Increases negative air volume and comperssion ratio to improve sensitivity and mid-stroke support. Learn More |
Vorsprung Fractive Tuning (Fit4-FS only) |
Replace the 3 mode FIT4 damper internals with a custom tuned compression assembly that gives you adjustable LSC and 3 clicks of HSC. Great upgrade for more aggressive riders. |
Bushing Burnishing |
Final sizing of bushings to provide stiction reduction and smooth sliding. Instant break-in. Requires fork or lower legs to be sent to Shockcraft |
Sealing Upgrades Internal |
Reduce oil migration in Grip and Grip2 dampers to allow use of better bath and damper oils for lower friction and better damping. Included in Shockcraft Full Service. |
Wiper Seal Upgrade |
Low friction seals with foam rings for all Fox 36 mm forks |
Stock |
FIT4 - Fox R3 5wt oil in damper - bleed full. FIT4 - Fox R3 5wt oil in damper - bleed full. GRIP/Grip2 - Fox 5wt PTFE in damper - bleed full. Lower Leg air side - 10cc Fox 20wt Gold Lower Leg FIT-RC2 damper side- 30cc Fox 20wt Gold Lower Leg FIT4 damper side - 40cc Fox 20wt Gold Lower Leg GRIP/Grip2 damper side - 40cc 5wt PTFE Slickoleum - air piston & seals |
Shockcraft Recommended |
FIT4 - Motorex 2.5 wt fork oil or Hot Oil Pink damper oil FIT RC2 - Motorex 2.5 wt fork oil or Hot Oil Pink damper oil Grip/Grip2 - Motorex 2.5 wt fork oil ideally with seal head upgrades Lower Leg air side - 10cc Supergliss Lower Leg FIT-RC2 damper side- 30cc Supergliss Lower Leg FIT4 damper side - 40cc Supergliss Lower Leg GRIP/Grip2 damper side - 40cc Motorex 2.5 wt fork oil or Supergliss Slickoleum - air piston & seals |
Last One Left
Shaft clamp tool for use in installation of Luftkappe & Secus
Learn MoreIn Stock
In Stock
In Stock
Last One Left
From: US$26.75
To: US$38.64
Final sizing and tolerancing of fork bushings to ensure minimal friction and maximum performance. Cures issue of friction and stiction to improve small bump control. Also reduces break-in time of a new fork to zero.
Burnish sizes are carefully chosen to provide maximum oil film thickness without any knocking or noticable play.
Available immediately for 30 mm, 32 mm, 34 mm, 35 mm and 36 mm forks. Other sizes will have a slight delay as we manufacture tooling.
Motorex 2.5 wt fork oil - 15 cSt @ 40°C
Available in 250 ml or 1 L bottles
Also available at a lower price in 1, 4 & 5 litre refilled bottles
Motorex 4 wt fork oil
16 cSt @ 40°C
Fox Racing Shox use Motorex 4wt oil in its MY21 DHX2 and FLOAT X2 shocks
Available in 250 ml or 1 L bottles
Also available at a lower price in 1, 4 & 5 litre refilled bottles
From: US$1.19
To: US$2,521.99
From: US$1.19
To: US$2,575.51
From: US$41.58
To: US$336.34
Fork service kit for F32, F34, F36, F38 & F40 forks 2016+ using FIT4 (CTD, RC2), GRIP or GRIP2 dampers.
Kit contains SKF or Fox OE fork seal kit, Shockcraft internal air seal kit, fork oil, bushing lubricant, air chamber lubricant, Slickoleum assembly grease, oil syringe & optional seal press tool. See Related Products for details on each kit component.
This kit replaces the Fox 5wt teflon oil in GRIP dampers and lower legs with Motorex 2.5 wt and Supergliss on the air-side. Motorex 2.5 wt oil is the same viscosity as Fox 5 wt but more slippery. FIT4 dampers use Supergliss in both sides of the lower legs.
From: US$112.94
To: US$320.98
Permanent repair of creaking and ticking noises from fork crowns. Also improves fork stiffness. Shockcraft has the technology and understanding to dismantle and reassemble fork crowns for safe and permanent creak repair.
Note that damaged crowns will be rejected. This is not a repair for parts stretched or bent.
Pricing depends on whether we receive a stripped Crown Steerer Unit (CSU) only or a whole fork. If you send a whole fork we need to strip and rebuild it.sembly.
Forks with cartridge dampers (e.g. Fox FIT/GRIP/GRIP2/CTD, RockShox Charger, Manitou MC2 or Mezzer) require a minimum of a Lower Leg & Air Spring Service.
Forks with in-leg or open bath dampers (e.g. Fox open bath, RockShox all except Charger, Marzocchi Z2) require a minimum of a Standard Service. The service labour pricing provided excludes additional repair. Parts, oil and freight are additional and vary depending on the brand & model and the problems found.
Available immediately for RS Zeb, RS Yari/Lyrik 35 mm, RS Pike 35 mm, RS 32 mm Fox 38 mm, Fox 36 mm, Fox 34 mm, Fox 32 mm Manitou 37, 34, 32 and 30 mm, MRP Ribbon 35mm forks and more. New sizes have a slight delay as we design and manufacture tooling.
From: US$74.30
To: US$526.04
Replacement of individual Stanchion or Steerer Tubes in fork crowns. Shockcraft has the technology and understanding to dismantle and reassemble fork crowns for repair.
Note that damaged crowns and tubes will be rejected.
Shockcraft Part Code: LBR-FORKTUBESWAP
In Stock
SKF Low Friction Flangeless Fork Seal kit for Fox 36 mm and Marzocchi Z1 2019+ forks
These flangeless seals have the same fork compatibility as the flanged option
Flangeless seals provide a tighter fit into the lower leg (to resist popping out with internal air leaks) which makes them more difficult to install than flanged seals
We recommend the use of a seal press tool for installation
Available Ex NZ Supplier 2 Days
Fox Service Set 2021 36 GRIP2 Cartridge - 180mm VVC HSR / LSR / HSC/ LSC (Fox)
Also fits Marzocchi Z1 2019+ forks
Complete damper assembly with adjuster knobs for repair, upgrade or tuning
Available stock or with Shockcraft tuning
Fox Part Code: 820-18-335-KIT
In Stock
Last One Left
Vorsprung Fractive upgrade tuning kit for Fox FIT4 Factory-Series fork dampers 2015-2019
Fits only FIT4 factory series dampers with LSC adjuster dial in centre of the Firm-Medium-Open dial
Requires significant tools and knowledge to install
Can be installed as part of any Shockcraft complete-fork or damper-only service (book here)
Hot Oil Pink 250 cc for rear shocks and fork cartridge dampers
14 cSt @ 40°C
Last One Left
In Stock
In Stock
In Stock
In Stock